(512) 980-6616

Our Plumbers Will Fix Your Water Heater Problems

CALL FOR AN ESTIMATE

Water Heater Solutions

Your water heater is one of the most important appliances in your home. It’s also one of the least understood.

Most people know that their water heater heats up to provide hot tap water, but beyond that, they’re clueless about how it works or what they need to do to maintain it.

Fortunately, with a little research and common sense, you can take care of your water heater without breaking a sweat! This article will explain everything you need to know about heating your water.

The best tips to find the right water heater for my house in greater Austin

Water heaters come in a range of sizes and capacities for different types of homes.

For example, if you live in a small apartment or have just one bathroom, then your best option is a tankless water heater.

The advantage of this type is that it doesn’t use up valuable space like a traditional tank.

If you live in the suburbs and need hot water for bathrooms and showers for 16 people at once, then you’ll want to invest in a gas-powered storage water heater, which can produce enough hot water to keep everyone warm and satisfied.

Even if you’re on a tight budget, there are still several options out there that will work for you. For example, some new construction homes come with solar water heaters that provide hot water for free.

If you want to add a solar water heater to your existing home, all you have to do is find out if it’s an option and how much it’ll cost.

CALL NOW (512) 980-6616

Request A Quote

We promise to get back to you as soon as possible.

Why is my water heater leaking?

If your water heater is leaking, you should call a professional to take a look at it.

Don’t ever go near this type of appliance unless you’re absolutely sure that the leak is turned off and cannot be touched with electricity because it could kill you or cause serious burns.

If dirty or rusty water is coming out, then the tank needs to be cleaned. Again, don’t do this if there’s still an open leak!

Once the leak has been fixed, unscrew part of the tank’s cap (most manufacturers make them easily removable) and remove any sediment buildup left behind by flushing all of the old product residues out.

Bleached sacrificial anode rods can help prevent chlorine depletion, which affects overall performance over time. 4-5% of all tanks are just replaced due to corrosion damage.

If you’re not sure whether your tank is up for the job, then call a plumber who can check the water heater’s lining and insulation. This will let you know if either one requires replacement or if it’s time to buy a new unit altogether.

As long as everything looks good on the inside, you can rest easy knowing that your water heater is in perfect working order.

What are the best water heater options out there?

In order to protect water heaters from corrosion and other failures, companies now offer many different models.

Despite this increased diversity, all models share the same basic qualities as they work to provide hot water for your home.

There are five main types of water heaters:

  • Electric
  • Has-powered tankless
  • Gas-powered storage
  • Geothermal
  • Solar

Install a water heater blanket to limit the loss of heat from your hot water tank. This simple device uses high-temperature resistant fabric that heats up as it’s exposed to warm air and then transfers that heat into the water inside the tank.

Do I need to replace or just repair my water heater?

If you’re not sure whether your tank is up for the job, then call a plumber who can check the water heater’s lining and insulation.

This will let you know if either one requires replacement or if it’s time to buy a new unit altogether.

If you’ve got a party-sized household with several bathrooms and visitors coming over all the time, then you’ll need to invest in one or more large gas-powered water heaters.

These are typically located outside your house, attached to the wall, or standing free but separate. While they take up quite a bit of space, there’s no other way for them to work effectively.

What are the most common water heaters problems?

Here are the most common water heaters problems.

·      Forgetful behavior

The most common problem that people have with their water heater is forgetting to turn it off when they leave the house.

This will cost them a lot of money and cause a lot of unnecessary work for you.

These days, you can also find water heaters that will turn themselves off if they’ve been idle for too long and detect low or no voltage.

·      Scale buildup

The second most common water heater issue has to do with scale buildup. This isn’t something that only happens in areas with hard water; it’ll happen everywhere if your water heater sits stagnant for weeks or months at a time.

The result is that the element becomes encrusted with tough deposits and will cook your hot water to smelly, unusable levels.

To prevent this from happening to you, all you have to do is add a water softener or a filter that removes minerals from your water supply.

·      Leaks and corrosion

Leaks don’t usually cause any lasting damage, but they can be expensive to fix and leave you without hot water for a while. Corrosion can also cause leaks, but it does so gradually over time.

The only way to prevent or slow down this problem is by flushing your tank regularly, which you can do by running the water until it’s hot and then letting it run for a minute or two. This will push all of the sediment through your plumbing system.

·      I don’t have enough hot water

If your cold water flows through the tank at a normal speed, but your hot water comes out in slow motion, you might be dealing with an issue known as “first-flush.”

First-flush is usually caused by low volume flow rates, which can happen if there are too many fixtures running through your plumbing.

To fix the problem, you can increase your tank’s height or run a separate water line to a second sink so that you have two basins from which to draw hot water.

If those don’t work for you, talk with a plumber about installing a recirculating pump inside your tank.

This will ensure that there is always hot water flowing into the tank, even if your house is using more than its fair share.

Your heating element can go out without warning, or you might notice that you have to run it continuously to keep your water warm.

If this is happening, there’s a good chance that the problem has to do with sediment buildup.

If you’ve never flushed your tank, now is the time to do it.

Flushing will remove much of the accumulated sediment and keep your heating element from clogging up. If this doesn’t work for you, call a plumber to take a look at your system.

Of course, there are other water heater problems as well, but they rarely occur on their own.

We hope you found this article useful and informative. Please, let us know what you think about it by leaving a comment below!

Reach Us

The Plumbers Near Me

12919 Meehan Dr, Austin, TX 78727

(512) 980-6616